What projects are you working on?

[dvenardos]

Just curious what everyone is working on?

I have got:

• GR AV-1RS - currently finishing the veneer and then assembling the network.
• Passive preamp - design is finalized, collecting parts.
• Condor power supply - ordered two linear ps (dweekie find) for Virtue amps and possible 41hz kit.
• Power one power supply - originally slated for SB3 but since purchasing external dac has moved to the wayside.
• Installing GIK acoustical panels.

Planning stage:

• GR dual SW-12 subwoofer.
• 41hz 5 channel amp.
• Ceiling speakers for kitchen.

[Jason]

finding part time job so I can start working on projects again

[persisting1]

Just curious what everyone is working on?

I have got:

• GR AV-1RS - currently finishing the veneer and then assembling the network.
• Passive preamp - design is finalized, collecting parts.
• Condor power supply - ordered two linear ps (dweekie find) for Virtue amps and possible 41hz kit.
• Power one power supply - originally slated for SB3 but since purchasing external dac has moved to the wayside.
• Installing GIK acoustical panels.

Planning stage:

• GR dual SW-12 subwoofer.
• 41hz 5 channel amp.
• Ceiling speakers for kitchen.

Progress pics?

[Mep]

I've got:

• Entertainment Center - about 13', will hold a fish tank and 3 bigfeet.
• Matching coffee table and end tables
• DIY sound absorbers to round sound system
• Computer/drafting corner desk with matching cabinet/bookcase

Yeah, I got enough going on for now.

[django1]

I'm waiting on billnchristy's tube pre-amp kit ( not that I have any time to put it together) and wondering if I can actually do it...
http://www.ninjasreview.com/forum/showthread.php?t=66

[sbisheff]

I'm planning on a 5'3" Sonosub with (3) 10" NHT subs tuned to 17hz and powered by a ULW-10 Amp.

This weekend I put in a new 20 amp circuit in the garage and ran 7 outlets including (1) 20amp twist lock receptical for my PDU that is powering my soon to be finished home network. The garage is all sheetrocked and painted so I ran it all in conduit and had nice boxes and black 20amp recepticals for it all. It turned out pretty good for a non-electrician :D

[Jason]

I'm planning on a 5'3" Sonosub with (3) 10" NHT subs tuned to 17hz and powered by a ULW-10 Amp.

This weekend I put in a new 20 amp circuit in the garage and ran 7 outlets including (1) 20amp twist lock receptical for my PDU that is powering my soon to be finished home network. The garage is all sheetrocked and painted so I ran it all in conduit and had nice boxes and black 20amp recepticals for it all. It turned out pretty good for a non-electrician :D

Sounds cool. Are you building 3 separate tubes, or doing something slick with all three in 1 tube??

[sbisheff]

Sounds cool. Are you building 3 separate tubes, or doing something slick with all three in 1 tube??

All three in one 24" diameter tube :dizzy: It's not gonna be a small little baby and from what I've heard, it should have very good output with these drivers as well.

[Jason]

hmm..how's the alignment? isobarik loading or something?? or are you building a larger diameter tube and all three will fit on one baffle?

[sbisheff]

hmm..how's the alignment? isobarik loading or something?? or are you building a larger diameter tube and all three will fit on one baffle?

Nope, (3) 10" drivers will fit in a 24" diameter hole. They are all just sitting pretty next to each other forming a triangle. I've already modeled the faceplate in Visio to make sure it fits :D

[Jason]

Nope, (3) 10" drivers will fit in a 24" diameter hole. They are all just sitting pretty next to each other forming a triangle. I've already modeled the faceplate in Visio to make sure it fits :D

cool. I don't know if anyone's seen this, but I found an interesting DIY box last night browsing around.

Here

[dvenardos]

I've got:

• Entertainment Center - about 13', will hold a fish tank and 3 bigfeet.
• Matching coffee table and end tables
• DIY sound absorbers to round sound system
• Computer/drafting corner desk with matching cabinet/bookcase

Yeah, I got enough going on for now.

I am not even including all the home improvement projects, or in my case completing my remodeling. :yes:

Progress pics?

I will have some pics this weekend. :thumbsup:

[etcarroll]

Trying to find time to upgrade my RS1Ks to Ninja MAster status.

Not happening anytime soon it would seem.