Did you try a lower crossover than 80 Hz with the 752, for kicks? If so, how did that go?
Announcement
Collapse
No announcement yet.
Chane 752 MTM Review
Collapse
X
-
Originally posted by Gerry View Post
What about the 752? 😉
In large rooms, I had useable response well into the mid to low 30's. Not saying, you won't need a sub, but with the sealed alignment, they dig DEEP.
- 1 like
Comment
-
Originally posted by BufordTJustice View Post
Stay tuned for episode 2; the L3c’s review. 😉😎👍
Regarding the forthcoming L3c review, I hope you will be able to dedicate a paragraph to an A2.4 and L3c comparison.
Though one step up in size and a different price class I am certain there will be endless amount of people wanting to know how they compare given that are both MTM configurations and that Chane set a very high bar when it created the A2.4s, irrespective of price.
I hope to be reading your review soon!
- 3 likes
Comment
-
Originally posted by Freddyknuckles View Post
Thank you for the detailed review and insights on the 752s.
Regarding the forthcoming L3c review, I hope you will be able to dedicate a paragraph to an A2.4 and L3c comparison.
Though one step up in size and a different price class I am certain there will be endless amount of people wanting to know how they compare given that are both MTM configurations and that Chane set a very high bar when it created the A2.4s, irrespective of price.
I hope to be reading your review soon!
The L Series sounds more expensive. That's the best summation. Incrementally better in every aspect of performance.
Comment
-
Originally posted by Ehill View PostI sold my JBL speakers about 4 months ago to a buddy that kept asking to buy them. So we’ve been speakerless for around 4 months. My wife and I can’t wait to go upstairs with a glass of wine to listen music or watch movies soon on our new Chane music and cinema speakers
We wound up giving away the JBLs. I felt bad taking money from friends for them.
- 2 likes
Comment
-
Originally posted by BufordTJustice View Post
I used them on 24” steel stands. You’ll want to employ something like the Monoprice Monolith 24" or Pangea DS400 24” 4 column stands and you’ll want to fill all the columns with sand.
- 1 like
Comment
-
Originally posted by Freddyknuckles View Post
These seem precariously perched up there, putting the height at 52". Do you think that is absolutely necessary or could you get away with something a little lower? Perhaps 20" stands?
As for height, that depends on your seat and ear height. You want your ear height to reside within the physical height of the primary horn mouth, well before the flat flange begins.
The ideal is for your ear to be at the same height as the horn throat (dead center).
- 1 like
Comment
Comment